① Peel off the transparent mount

Please peel it off slowly.
Small parts such as letters may come off.

② Paste

Clean the surface to be attached with alcohol, etc.

③ Rub

Rub the entire surface with your fingers and crimp it.
Carefully rub the fine parts.

④ Peel off the transfer sheet

Once you have crimped it, slowly peel it off.
Peeling off too vigorously may result in poor transfer.

* If there is a part that has not been transferred, return the transfer sheet and rub it again and press it.

⑤ Completion


It can also be applied to uneven surfaces such as the edges of tool boxes and carry cases!